DPCfront Comfort Temperature Control Device

Andmeleht Dokumentatsioon Tagasi
17-8821-7780/34204000

Funktsioonid

  • Convenience version of the temperature control devices with processvalue feedback over 4 to 20 mA analog output
  • Logic output for SSR
  • Universal measuring input
  • Pre-parameterisation as PID control device
  • very good measuring accuracy

Sertifikaadid

Russian GOST R POCC DE ME92.B02499

Ex kaitse liik

Operating temperature range: 0 °C up to +50 °C

Kirjeldus

The DPCfront Comfort temperature control device is designed with extra convenient features. In the factory setting it works as a PID Control device with a logic output and a relay output. As an alternative, the same device can also be used as a ON/OFF controller.

For regulation the device uses a logic output for solid state relays. The relay output is used for alarm signalling. The functions high and low alarm, sensor monitoring and heating circuit monitoring offer additional safety for the temperature regulation.

When using the device with the factory setting, a simple setup with just a few buttons is used to start operation for the first time. It is only necessary to set the setpoint, analog output limits, low alarm, and if required, high alarm.

Tehnilised andmed (väljavõte)

(Täpsema info jaoks klikka siia)
Protection classIP 54 or IP 65 with installation sealing
Dimensions48 mm x 48 mm x 108 mm (lenght x width x depth)
MaterialEnclosure: Plastic UL 94 V0
InstallationFront panel (Cut-out 45.5 mm x 45.5 mm)
Storage temperature-10 ?C to +60 ?C
Weight180 g
Temperature rangedepending on the sensor version
VoltageAC 100 V to AC 240 V ? 10% 50/60 Hz
Electrical life> 105 switching cycles (relay output)
ConnectionTerminal screws 2 x 1,5 mm?

Dokumentatsioon

Data Sheet - DPCfront Comfort Temperature Control Device German English French Russian