DPCfront Comfort Temperature Control Device
17-8821-7780/34204000
Funktsioonid
- Convenience version of the temperature control devices with processvalue feedback over 4 to 20 mA analog output
- Logic output for SSR
- Universal measuring input
- Pre-parameterisation as PID control device
- very good measuring accuracy
Ex kaitse liik
Kirjeldus
The DPCfront Comfort temperature control device is designed with extra convenient features. In the factory setting it works as a PID Control device with a logic output and a relay output. As an alternative, the same device can also be used as a ON/OFF controller.For regulation the device uses a logic output for solid state relays. The relay output is used for alarm signalling. The functions high and low alarm, sensor monitoring and heating circuit monitoring offer additional safety for the temperature regulation.
When using the device with the factory setting, a simple setup with just a few buttons is used to start operation for the first time. It is only necessary to set the setpoint, analog output limits, low alarm, and if required, high alarm.
Tehnilised andmed (väljavõte)
(Täpsema info jaoks klikka siia)Protection class | IP 54 or IP 65 with installation sealing |
Dimensions | 48 mm x 48 mm x 108 mm (lenght x width x depth) |
Material | Enclosure: Plastic UL 94 V0 |
Installation | Front panel (Cut-out 45.5 mm x 45.5 mm) |
Storage temperature | -10 ?C to +60 ?C |
Weight | 180 g |
Temperature range | depending on the sensor version |
Voltage | AC 100 V to AC 240 V ? 10% 50/60 Hz |
Electrical life | > 105 switching cycles (relay output) |
Connection | Terminal screws 2 x 1,5 mm? |