Bushing conductor studs, pressure and vacuum tight

37-9119-A019/70E.

Certificates

-25 ?C up to +100 ?C

Description

Industrial processes often take place within closed containers, under increased pressure or even vacuum conditions. It is therefore of utmost importance that no media leakages or pressure/vacuum drops occur when electrical power or signals are led through the container wall. Our BARTEC pressure and vacuum sealed stud-type bushings provide a simple and cost-effective solution to this problem. The stud-type bushings essentially consist of a threaded metal sleeve and the stud forming one block by means of a creepage-proof insulation material.

The electrical connection can be made by the user himself with conventional connection systems. The seals can withstand pressures from 10 mbar abs. to 63 bar depending on the type used for the installation.

Depending on their field of application, BARTEC pressure and vacuum sealed stud-type bushings can be used at temperatures of -40 ?C to +150 ?C rising to short-term +180 ?C. Our BARTEC studtype bushings can also be used under conditions that differ from the basic technical data listed below.

They are not approved for the use in hazardous areas.

Technical data (extract)

(Click here for more information)
Dimensionssee data sheet
Pressure10 mbar abs. to 63 bar at RT +25 ?C (depending on outer seal)
InstallationStud thread M8 to M16
Voltage400 V (lower, depending on vacuum)
Current100 A, 250 A, 315 A (see data sheet)

Documentation

Data Sheet - Bushing conductor studs, pressure and vacuum tight German English French Russian Spanish 
Customer requirements - Cable entries/line bushings German English French Russian