Cable entries, pressure and vacuum sealed

37-920.-..../7...

Certificates

-25 ?C up to +100 ?C

Description

Industrial processes often take place within closed containers, under increased pressure or even vacuum conditions. It is therefore of utmost importance that no media leakages or pressure/vacuum drops occur when cables are led in.

Our BARTEC pressure and vacuum sealed cable entries provide a simple and cost-effective solution to this problem. The cable entries essentially consist of a metal sleeve encapsulating the whole length of the electric conductors within epoxy-resin. This means that sealing is not only guaranteed for the whole length of the conductors but also through the stranded conductors themselves.

Depending on their field of application, BARTEC pressure and vacuum sealed cable entries can be used at temperatures of -70 ?C to +150 ?C rising to short-term +180 ?C. With regard to the actual temperature and surrounding media, pressures of 10-6 mbar to more than 200 bar can be withstood.

Our BARTEC cable entries can also be used under conditions that differ from the basic technical data listed below.

They have not been approved for use in potentially explosive areas.

Explosion-proof and pressure-sealed versions
(PTB 97 ATEX 1047 U).

Technical data (extract)

(Click here for more information)
Protection classIP 68
Dimensionssee data sheet
Pressure63 bar to RT (RT= +25 ?C)
Voltage450/750 V
ConnectionNominal conductor cross section 0,35 mm? to 6 mm?

Documentation

Data Sheet - Cable entries, pressure and vacuum sealed German English French Russian Spanish 
Customer requirements - Cable entries/line bushings German English French Russian