Vapor Pressure Process Analyzer RVP-4
RVP-4
Funktsioonid
- ASTM compliance
- Customized solutions
- Dry measuring cell
- Resistant to wear
- Network and Fieldbus communication
- Rugged design of measuring cell
- High precision and maximized performance due to optimized assembly of measuring cell
- Short reaction times due to integrated temperature control unit
- Dry measuring cell: Due to advanced temperature control capability oil bath has been avoided
- Wide range of inlet temperatures.
- No need for additional temperature pre-conditioning in most applications
- Also applicable for highly viscous samples
- Low sample consumption
- Re-cooling of peltier device (TEM) by either product or coolant
- Integrated failure diagnosis and self monitoring
- Heat tracing if required
- Additional cooling for the control unit housing if required
Ex kaitse liik
Optional available classification:
CSA Class I Div. 2 and Zone 1
Ümbritseva keskkonna temperatuur
DIN EN ISO 13016-1
Correlates with:
ASTM D 4953 (DVP), ASTM D 323 (RVP),
ASTM D 5482 (Mini Method Atmospheric),
ASTM D 6377 (VPCR), ASTM D 1267 (LP Gas),
ASTM D 6897 (LPG Expansion)
Kirjeldus
The RVP-4 performs online, cyclical automated measurement of vapor pressure in a pre-calibrated measuring range for fuels, crude oil, liquefied gases or similar products. Two sample streams and one calibration stream can be connected to the unit. It is used to monitor the production quality of the process and the compliance with defined specifications for petrochemical products.Definition of the vapor pressure
The vapor pressure is the partial pressure of the saturated vapor which is in thermodynamic equilibrium with the liquid phase of the product. The vapor pressure depends on the composition of the product and on the temperature.
General significance
The vapor pressure of a products is an important criterion during transport and storage:
- Pressure load on pipes and tanks
- Pumps cavitation
- Emission due to vaporization (environmental protection)
Significance for fuels
Fuel factors influenced by the vapor pressure include:
- Behavior in the fuel line and/or fuel pump (vapor bubble formation)
- Cold start behavior
- Warm-up behavior
- Icing of carburettors
Tehnilised andmed (väljavõte)
(Täpsema info jaoks klikka siia)Protection class | IP 54 |
Dimensions | (W x H x D) approx. 1190 x 1930 x 710 mm |
Weight | approx. 250 kg |
Pipe fittings | Swagelok? 6 mm/12 mm (other fittings on request) |
Measurement range | standard: up to 1.6 bar optional: up to 16 bar |
Display | TFT display with touch function (800 x 600 pixel) |
Keyboard | virtual keyboard, controlled via TFT display with touch function |
Operating system | Windows XP? |
Voltage | AC 230 V ? 10 %, 1 phase; 50 Hz; (other rating on request) |
Power | max. approx. 500 W |