Flash Point Process Analyzer FPA-4

Andmeleht Dokumentatsioon Tagasi

FPA-4

Funktsioonid

ASTM correlation
Customized solutions
Network and Fieldbus communication
Continuous measurement
Multi-stream capability
Integrated failure diagnosis and self monitoring
No coking of measuring cell by catalytic reaction
Scheduled automatic regeneration

Sertifikaadid

II 2G IIC T4 (or T3) Gb (Europe)
Protection type depending on application
Certification:
pending for ATEX, IECEx and CSA US/CAN

Ex kaitse liik

ASTM D 56, ASTM D 93
DIN EN ISO 13736, DIN EN ISO 2719
IP 170, IP 34
DIN 51755

Ümbritseva keskkonna temperatuur

operation 5 to 40 °C (41 to 104 °F)

Kirjeldus

FPA-4 Redesign.

The established Flash Point Process Analyzer FPA-4 and its measurement principle remains the best solution for jet fuel, kerosene, naphtha and other refinery applications.

The improved concept of the analyser design has resulted in an extended measuring range up to 180 ?C (356 ?F) which enables the FPA-4 to be used for additional applications such as Biodiesel.

Tehnilised andmed (väljavõte)

(Täpsema info jaoks klikka siia)

Protection class	IP 54
Humidity	operation 5 to 80 % relative humidity, non-corrosive
Pipe fittings	Swagelok^? 6 mm/12 mm/18 mm (other fittings on request)
Measurement range	30 to 180 ?C (86 to 356 ?F)
Display	TFT display with touch function (1024 x 768 pixels)
Interface	MODBUS interface MODBUS/RTU via RS485 or RS422 or FOC MODBUS/TCP via FOC Remote access via Modem or Ethernet
Keyboard	virtual keyboard, controlled via TFT display
Operating system	Windows^? 7
Voltage	AC 230 V ? 10 %, 1 phase; 50 Hz AC 115 V ? 10 %, 1 phase; 60 Hz
Power	max. approx. 700 W

Dokumentatsioon

Data Sheet - Flash Point Process Analyzer FPA-4