Flash Point Process Analyzer FPA-4

Data sheet Documentation Back
FPA-4

Features

  • ASTM correlation
  • Customized solutions
  • Network and Fieldbus communication
  • Continuous measurement
  • Multi-stream capability
  • Integrated failure diagnosis and self monitoring
  • No coking of measuring cell by catalytic reaction
  • Scheduled automatic regeneration

Certificates

Ex II 2G IIC T4 (or T3) Gb (Europe)
Protection type depending on application
Certification:
pending for ATEX, IECEx and CSA US/CAN

Ex protection type

ASTM D 56, ASTM D 93
DIN EN ISO 13736, DIN EN ISO 2719
IP 170, IP 34
DIN 51755

Ambient temperature

operation 5 to 40 °C (41 to 104 °F)

Description

FPA-4 Redesign.

The established Flash Point Process Analyzer FPA-4 and its measurement principle remains the best solution for jet fuel, kerosene, naphtha and other refinery applications.

The improved concept of the analyser design has resulted in an extended measuring range up to 180 ?C (356 ?F) which enables the FPA-4 to be used for additional applications such as Biodiesel.

Technical data (extract)

(Click here for more information)
Protection classIP 54
Humidityoperation 5 to 80 % relative humidity, non-corrosive
Pipe fittingsSwagelok? 6 mm/12 mm/18 mm (other fittings on request)
Measurement range30 to 180 ?C (86 to 356 ?F)
DisplayTFT display with touch function (1024 x 768 pixels)
InterfaceMODBUS interface
MODBUS/RTU via RS485 or RS422 or FOC
MODBUS/TCP via FOC
Remote access via Modem or Ethernet
Keyboardvirtual keyboard, controlled via TFT display
Operating systemWindows? 7
VoltageAC 230 V ? 10 %, 1 phase; 50 Hz
AC 115 V ? 10 %, 1 phase; 60 Hz
Powermax. approx. 700 W

Documentation

Data Sheet - Flash Point Process Analyzer FPA-4 German English