Distillation Process Analyzer DPA-4
DPA-4
Funktsioonid
- ASTM D86 compliance in Standard Analysis Method SAM
- Capability to reduce cycle time in Rapid Analysis Method RAM
- De-coking
- State-of-the-art technology
- Network Fieldbus communication
- The complete boiling curve is measured in every cycle (SAM)
- Measuring points of interest freely definable by software
- Enhances automatic control of blending processes
Sertifikaadid
II 2G IIB+H2 T4 or II 2G IIB+H2 T3
Optional available classification (USA and CAN):
CSA: Class I Div. 2 and Zone 1, T4 or T3
Ex kaitse liik
DIN EN ISO 3405
IP 123
Ümbritseva keskkonna temperatuur
Kirjeldus
The DPA-4 is the only ASTM D86 compliant analyzer available. It is the most widespread distillation process analyzer on the market. Refinery operator?s requirements have had a significant influence on the redesign process of the new DPA-4 model with the result of the faster Rapid Analysis Method (RAM) beside the Standard Analysis Method (SAM) which is still compliant to the ASTM D86 laboratory method.Switching between the methods after any desired measurement cycle is programmable or manually user selectable which allows flexibility at any time (e.g.: x RAM-cycles and occasional SAM-cycles for validation). Avoiding correlative methods for the SAM was the highest priority. The faster RAM also uses the measurement setup required by the ASTM D86 method for a complete analysis including a flask, condenser and receiver. However, due to the unique design, measurement cycles of approx. 20 minutes are possible (sample dependent). A special de-coking program prevents the coking of the measurement setup. Thus also allows the use of samples which tend to coke and therefore minimizes the maintenance requirements significantly.
Tehnilised andmed (väljavõte)
(Täpsema info jaoks klikka siia)Protection class | IP 54 |
Dimensions | (L x W x H) approx. 1191 mm x 1930 mm x 710 mm |
Humidity | 5 to 80 % relative humidity, at 25 ?C/77 ?F, non-corrosive |
Weight | approx. 250 kg without options (option chiller 100 kg) |
Pipe fittings | Swagelok? 6 mm/12 mm (other fittings on request) |
Measurement range | 20 ?C to 420 ?C (68 ?F to 788 ?F) output of any temperature/distillate amount via Modbus |
Display | Display with touch function |
Interface | Remote access (option) via modem or Ethernet over VDSL Modbus interfaces (option) Modbus/RTU via RS485 or RS422 Modbus/TCP via VDSL others on request |
Keyboard | virtual keyboard, controlled via TFT |
Operating system | Windows XP? |
Voltage | AC 230 V ? 10 %, 1 phase; 50 Hz; other ratings on request |