BARTEC – THE WORLD OF SAFE.T® TECHNOLOGY
Remote I/O Module ANTARES 8DO-SCL
17-6143-1010/0000
Features
- 8 channels digital out Ex ia IIC
- Single Channel Current Limitation
- Integrated bus rail
- Installation in ATEX Zone 1/2
or Zone 21/22 - Hot-Swap
- Galvanic isolation between the inputs and the system
- Line break/short circuit monitoring
- Plug-in and codable spring clamps
- 2 LED displays per channel
Certificates
PTB 11 ATEX 2014 IECEx PTB 11.0054 DNV A-13339 
GOST R POCC DE.ME92.B02833 RTN PPC 00-049813 
KTL 13-KB4BO-0306 KTL 13-KB4BO-0307 
UL BR 13.0270 Ex protection type
II 2 (1)G Ex ib [ia IIC/IIB Ga] IIC T4 Gb II (1)D [Ex ia Da] IIICIECEx:
Ex ib [ia IIC/IIB Ga] IIC T4 Gb
[Ex ia Da] IIIC
Ambient temperature
EN 61241-0:2006 EN 61241-11:2006
EN 61000-6-2:2005 EN 61000-6-4:2007
EN 55011:2007
IEC 60079-0:2007
IEC 60079-11:2006
IEC 61241-0:2004,
modified + Corr. Nov. 2005
IEC 61241-11:2005 + Corr. Feb. 2006
Description
The Remote I/O Module ANTARES 8DO-SCL (single channel limitation) is operated and supplied with power through the Rail Control Unit (RCU) ANTARES. This module is suitable for the direct control of up to 8 intrinsically safe solenoid valves in the explosion hazardous area.The hot swap capability allows the electronic unit to be replaced without disconnecting from voltage even in an Ex atmosphere. The internal and galvanically isolated bus connection is established by simply joining the modules to the RCU. A bus rail is not necessary. Line break/short-circuit monitoring can be programmed for each channel. The bus status messages and individual messages per channel are displayed through the LEDs. This facilitates diagnosis at the module as well. The ANTARES Designer software allows the module to be programmed and the output load to be calculated automatically. See the system description for installation instructions.
Technical data (extract)
(Click here for more information)| Protection class | (EN 60529) Enclosure: IP 30 in the ANTARES system construction |
| Dimensions | (W x H x D) 45 mm x 110 mm x 114.5 mm |
| Material | Enclosure material: PA |
| Installation | Mounting rail TH 35-15 EN 60715 (Metal) |
| Storage temperature | -25 ?C up to +85 ?C |
| Humidity | 5 up to 95 %, non-condensing |
| Vibration | (EN 60068-2-6) 2 g/7 mm; 3 Hz bis 200 Hz in all 3 axes |
| Shock | (EN 60068-2-27) 15 g, 11 ms in all 3 axes |
| Weight | approx. 390 g |
| Display | LEDs in enclosure front: Status ST, PWR, ERR1, ERR2 Outputs 2 LEDs per channel 1 x LED yellow Channel active 1 x LED red Channel error |
| Interface | Number of channels 8 digital outputs Ex i (short-circuit-proof) |
| Voltage | Supply voltage: through internal bus No-load voltage: DC 24 V |
| Resistance | Internal resistance: 271 Ohm |
| Connection | - plug-in tension spring clamp 4-pole - up to 2.5 mm? - optional coding and numbering |
