BARTEC – THE WORLD OF SAFE.T® TECHNOLOGY
Remote I/O Module ANTARES 16DI-N
17-6143-1008/0000
Features
- 16 channels digital in Ex ia IIC
- For NAMUR sensors
DIN EN 60947-5-6 - Integrated bus rail
- Installation in ATEX Zone 1/2 or
Zone 21/22 - Hot-Swap
- Galvanic isolation between the inputs and system
- Line break/short-circuit monitoring
- Plug-in and codable spring clamps
- 2 LED displays per channel
Certificates
PTB 11 ATEX 2015 IECEx PTB 11.0055 DNV A-13339 
GOST R POCC DE.ME92.B02833 RTN PPC 00-049813 
KTL 13-KB4BO-0304 KTL 13-KB4BO-0305 
UL BR 13.0249 Ex protection type
II 2 (1)G Ex ib [ia IIC/IIB Ga] IIC T4 Gb II (1)D [Ex ia Da] IIICIECEx:
Ex ib [ia IIC/IIB Ga] IIC T4 Gb
[Ex ia Da] IIIC
Ambient temperature
EN 61241-0:2006 EN 61241-11:2006
EN 61000-6-2:2005 EN 61000-6-4:2007
EN 55011:2007
IEC 60079-0:2007
IEC 60079-11:2006
IEC 61241-0:2004,
modified + Corr. Nov. 2005
IEC 61241-11:2005 + Corr. Feb. 2006
Description
The Remote I/O Module ANTARES 16DI-N isoperated and supplied with power by means of the Rail Control Unit (RCU) ANTARES. This module allows 16 binary signals to be connected in the Ex area. NAMUR sensors, optocouplers, mechanical contacts or other actuating elementscan be connected with intrinsic safety.
The hot swap capability allows the electronic unit to be replaced without disconnecting from voltage even in an Ex atmosphere. The internal and galvanically isolated bus connection is established by simply joining the modules to the RCU. A bus rail is not necessary. Line break/short-circuit monitoring can be programmed for each channel. The bus status messages and individual messages per channel are displayed through the LEDs. This facilitates diagnosis at the module as well. The module is programmed with ANTARES Designer software. See the system description for installation instructions.
Technical data (extract)
(Click here for more information)| Protection class | (EN 60529) Enclosure: IP 30 in the ANTARES system construction |
| Dimensions | (W x H x D) 45 mm x 110 mm x 114.5 mm |
| Material | Enclosure material: PA |
| Installation | Mounting rail TH 35-15 EN 60715 (Metal) |
| Storage temperature | -25 ?C up to +85 ?C |
| Humidity | 5 up to 95 %, non-condensing |
| Vibration | (EN 60068-2-6) 2 g/7 mm; 3 Hz bis 200 Hz in all 3 axes |
| Shock | (EN 60068-2-27) 15 g, 11 ms in all 3 axes |
| Weight | approx. 490 g |
| Display | LEDs in enclosure front: Status ST, PWR, ERR1, ERR2 Inputs 2 LEDs per channel 1 x LED yellow Channel active 1 x LED red Channel error |
| Interface | Number of channels NAMUR to EN 60947-5-6: - 16 digital inputs Ex i (short-circuit-proof) |
| Voltage | Supply voltage: through internal bus Sensor supply: 8.2 V |
| Switching treshold | damped < 1.2 mA not damped > 2.1 mA Open circuit < 0.1 mA Short-circuit > 7.4 mA |
| Connection | - plug-in tension spring-loaded clamp, 4-pole - up to 2.5 mm? - optional coding and numbering |
