DTW/DTB Flame-proof temperature monitor/limiter

Certificates

   LCIE 08 ATEX 6073 X
 RTN PPC 00-38415
 GOST R POCC DE.ME92.B01970
 GOSPROMNADZOR 11-02-0015-2012

Ex protection type

 II 2G Ex d IIC T6
 II 2D tD A21 IP 6X T 80°C

Ambient temperature

device: -40 °C up to +60 °C
Operating temperature range sensor:
-40 °C up to +215 °C
Operating temperature range capillary tube:
-50°C up to +215°C

Description

The flameproof encapsulated temperature controllers/limiters (DTW/DTB) are designed for (trace)-heating applications in the Ex area. They can be used both for protection against frost and for maintenance temperature applications. Heating units and other operating equipment are switched on and off by means of the temperature controller when the temperature is too high or too low. The DTB temperature limiter is designed with resetting lockout; resetting (restarting) is only possible on the device. Can be used for monitoring temperature in the air or on surfaces.

Function

A change in temperature in the sensor causes a change in volume in the fluid filled in the measuring system, which in turn results in a movement of a membrane, which is connected to transmission mechanics and activates a microswitch. If the sensor temperature exceeds the pre-set level, the contact is actuated.

The temperature limiter switches off permanently if the temperature is exceeded. Once the temperature drops, the temperature limiter can be unlocked manually. If there is a break in the measuring system (leakage), the circuit remains open permanently.