BARTEC – THE WORLD OF SAFE.T® TECHNOLOGY
MSB system Cold-applied technology
05-0091-01....
Features
- Direct connection of self-limiting heating cable into the junction box
- Connection and termination in one set
- Small place saving and economic solution
- Easy to project and assembling with silicone cold-applied technology
Certificates
KEMA 08ATEX0110 (System) IECEx KEM 09.0083 (System) 
TC RU C-DE.GB06.B.00230 Ex protection type
II 2G Ex e IIC 150 °C (T3), T4 II 2D Ex tD A21 IP 65 T 150 °C, T 130 °CAmbient temperature
depends on used junction box
-40 °C up to +55 °C
Standard polyester Type 27-5452-4.......
for heating cable switched on: up to +110 °C
for heating cable switched off: up to +130 °C
Description
For direct connection of self-limiting heating cable Type MSB (Order no. 07-5804-2..X and 07-5804-2..Y)into the junction box the 2 supply leads are unsulated by silicone glue and a silicone hose.A green yellow protection tube is pulled over the tinned copper braiding inside the insulation sheath. The copper braiding and the metal cable glands with an extra lead are prepared to be connected to the protective earth. The end of the self-limiting heating cable is insulated with silicone glue and silicone end cap.
Technical data (extract)
(Click here for more information)| Heat output | 13 W/m, 19.5 W/m, 27.5 W/m, 34.5 W/m, 44 W/m |
| Voltage | Nominal voltage: AC 208 V up to AC 254 V |
