PSBL System - Cold applied technologyexplosion protected

Data sheet Documentation Back

05-0091-013.

Features

Direct connection of self- limiting heating cable into the junction box
Connection and termination in one set
Small place saving and economic solution
Easy project and assembling with silicone cold applied technology

Certificates

KEMA 08ATEX0112

IECEx KEM 09.0085 (System)

Ex protection type

System:

II 2G Ex e II T5

II 2D Ex tD A21 IP 65 T 95 °C

Ambient temperature

depends on used junction box
-55°C up to +55°C
Standard: polyester type 27-5452-4.......
for heating cable switched on up to +65 °C

Description

For direct connection of self-limiting heating cable type PSBL (Order no. 07-5807-....) into the junction box the 2 supply leads are unsulated by silicone glue and a silicone hose.

A green yellow protection tube is pulled over the tinned copper braiding inside the insulation sheath. The copper braiding and the metal cable glands with an extra lead are prepared to be connected to the protective earth.

The end of the self-limiting heating cable is insulated with silicone glue and silicone end cap.

Technical data (extract)

(Click here for more information)

Voltage	AC 208 V to AC 254 V AC 110 V to AC 120 V
Power	10, 15, 20, 25, 30W/m

Documentation

Data Sheet - PSBL System - Cold applied technology, PSBL system Cold-applied technology media protected,

Declaration of Conformity Type 27-1580-..10/....

Operating Instructions - Connection and Remote End Termination for PSBL Type 27-1580-..10/....