Bushings and cable entries pressure and vacuum sealednon explosion-proof

Features

  • Economical, due to high packing density
  • Space-saving, due to internal thread
  • Fast installation with the small flange versions
  • Corrosion-resistant due to high-quality sleeve material
  • Bushing stems with suitable thermo material to ensure unimpaired signals from thermal sensors
  • Wide temperature range from
    -25

Certificates

-70 ?C up to +150 ?C

Description

Cable entries are a means of running electrical cables into enclosures and preserving a secure seal at the point of entry.

The standard version IP 68 is suitable for use in environments from 10-6 mbar to 63 bar overpressure. Depending on the pressure and the medium to be sealed you can choose between two temperature ranges:
-25 ?C to +100 ?C
-70 ?C to +150 ?C

Depending on the pressure at the cable entry and the medium it must to be sealed, there are versions for up to 1000 bar. BARTEC IP 68 cable entries not only provide sealed cable sheath but also protected wire strands.

BARTEC cable entries basically consist of a sleeve fitted around resin encapsulated cables and conductors. Even the standard version satisfies most of the requirements for a seal made by modern process technologies. Higher demands are better met by versions with for < 10-6 mbar and > 63 bar. The BARTEC bushings have been tested with oil at 2000 bar.

Technical data (extract)

(Click here for more information)
Protection classIP 65 to IP 68
Materialnickel-plated brass, stainless steel 1.4305 or 1.4571
Pressureup to 200 bar (Vakuum 10-6 mbar)

Documentation

Data Sheet - Bushings and cable entries pressure and vacuum sealed German English French Russian Spanish 
Customer requirements - Cable entries/line bushings German English French Russian